Origami Gel Metallic Silver

€9.90 (περιλ. ΦΠΑ 24%)

Origami Gel is used for geometric designs.

Elastic and easily stretched to make various types of designs for example geometric and straight lines
Extension of a thin, elegant line that does not break making it easier to complete your design quickly and efficiently
It is a very sticky gel which makes it easier to adhere to the nail for best designs
It can be used for on top of a completed nail design / gel polish
Due to its special composition it acts like a “rubber band”
Cures in 60 seconds LED lamp and 3 minutes in UV Lamp

All our products are Cruelty free and have been approved by the Leaping Bunny International.

Prepare the nails with a dry manicure
Apply Superbond and allow to dry with air
Apply a layer of GEL.IT.UP by GIUP® Base coat and 2 minutes in a 36W UV lamp or for 90 seconds in a 48W LED lamp.
Apply your favorite soak off gel polish color and cure.
Clean the sticky layer from the nail surface with the Cleanser / Sanitizer.
Take with a Nail Art brush or a Dotting Tool a sufficient amount of Origami (Spider Gel) and make a dot where we want to start our design and we pull like a thread and repeat the movement in different directions until we run out of quantity that our brush or dotting tool has.
We repeat the process until we complete our design.
Curing time 2 minutes in 36W UV lamp or for 60 seconds in 48W LED lamp.
Apply the top coat of your choice ensuring to seal the free edges.
Allow the Top Coat to cool for about 30 seconds before applying oil or cream to the nails.

Apply your favorite soak off gel polish color and cure.
Apply the Top Coat of your choice as the final layer.
Cure for 2 minutes in a 36W UV lamp or for 60 seconds in a 24W LED lamp.
If using Wipe Off Top Coat, remove the sticky layer with Cleanser / Sanitizer.
Using a Nail Art brush or a dotting tool take a sufficient amount of Origami (Spider Gel) and make a dot where we want to start our design.
Then we pull like a thread and repeat the movement in different directions until the quantity we have in the brush or the dotting tool is finished.
Repeat the process until the design is complete.
Curing time 2 minutes in a UV lamp of 36W or for 90 seconds in an LED lamp of 48W.
Remove the sticky layer with the Cleanser / Sanitizer.